DESCRIPTION AND FEATURES
1091M Series Non-Relampable LED Indicator Lights
Solid-state indicator lights complete with built-in
current-limiting resistor and rectifier diode.
Mounting: Will snap-fit into Ø.500/.505 hole in
panels .020/.100 thick. Push-on speednut SN0461
also available.
Mounting hole pattern on page SP2.
Wire Leads: No.22 AWG (105°C),lead color: red
and white, 4.40/4.80 long, stripped .430/.570
Lens: Polycarbonate
Anode(+): Red lead
Bezel: Polished stainless steel. For black finish
add "X" after the series letter(s).
Housing: White Nylon
* Also incorporates 1N4004
(400 P.I.V.) rectifier diode.
Yellow
Green
Red
Lens Color
4304H7
4304H5
4304H1
Incorporates LED
*
To use 24V model: Beyond 32VAC add 30 ohms per volt; beyond 24 VDC add 50 ohms per volt.
Use 1/2W resistor up to 50V; 1W resistor for 50V to 70V; 2W resistor for 75V to 125V. Do not use beyond 125V.
Notes: Also incorporates
IN4004 (400 P.I.V.) rectifier
diode.
*125 VAC supplied with
6" white wire, stripped 1/2"
with external 3.9K 1/2 watt
resistor attached to one lead,
covered with shrink tubing
insulation.
All dimensions
in
inches.
390
1091M7-12V
1091M5-12V
1091M1-12V
(12V)
Model No.
150
1091M7-6V
1091M5-6V
1091M1-6V
(6V)
Model No.
(ohms)
InternalResistor
Yellow
Green
Red
Lens Color
LE D Solid State Indicato
r
1000
1091M7-24V
1091M5-24V
1091M1-24V
(24V)
Model No
.
(2) 3.9K1/2W*
(One Internal)
1091M7-125VAC
1091M5-125VAC
1091M1-125VAC
(105-125 VAC*)
Model No
.
22 to 32
10 to 20
5to11
VAC
24V
12V
6V
Nominal
Voltage Tabl
e
12 to
24
105 to 125
125 VAC -
6to13.5
3.5 to 6.5
VD
C
1.130
.
380
Ø.
630
MAX.
Ø.
500
America:
CML Innovative Technologies,Inc.
147 Central Avenue
Hackensack, NJ 07601 -USA
Tel:1-201-489 -8989
Fax:1-201-489 -6911
e-mail:americas@cml-it.com
Europe:
CML Technologies GmbH &Co.KG
Robert-Bunsen-Str.1
67098 Bad Dürkheim -GERMANY
Tel:+49 (0)6322 9567-0
Fax:+49 (0)6322 9567-88
e-mail:europe@cml-it.com
Asia:
CML Innovative Technologies,Inc.
61 Aida Street
Singapore 459975
Tel:(65)9630 -5003
e-mail:asia@cml-it.com
CML-IT reserves the right to make specification revisions that enhance the design and/or performance of the product
1091M Series Non-Relampable LED Indicator Lights
