https://www.phoenixcontact.com/us/products/2903151
09/06/2016Page1/7
Power supply unit-TRIO-PS-2G/1AC/24DC/20-2903151
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: single-phase,
output: 24VDC/20A
Product Description
TRIO POWER power supplies with standard functionality
The TRIOPOWER power supply range with push-in connection has been perfected for use in machine building. All functions and the space-saving
design of the single and three-phase modules are optimally tailored to the stringent requirements. Under challenging ambient conditions, the power
supply units, which feature an extremely robust electrical and mechanical design, ensure the reliable supply of all loads.
Why buy this product
Save time and costs, thanks to the Push-in connection and narrow design
Increase system availability, thanks to dynamic boost with 150% of the nominal current for five seconds
Maximum flexibility due to the wide temperature range from -25°C to +70°C and device startup at -40°C
Key Commercial Data
Packing unit 1 STK
Weight per Piece (excluding packing) 1,800.000 g
Custom tariff number 85044030
Country of origin China
Technical data
Dimensions
Width 68 mm
Height 130 mm
Depth 160 mm
Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
https://www.phoenixcontact.com/us/products/2903151
09/06/2016Page2/7
Power supply unit-TRIO-PS-2G/1AC/24DC/20-2903151
Technical data
Ambient conditions
Ambient temperature (storage/transport) -40 °C ... 85 °C
Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
Noise immunity EN 61000-6-2:2005
Maximum altitude ≤ 4000 m (> 2000 m, observe derating)
Input data
Nominal input voltage range 100 V AC ... 240 V AC -15 % ... +10 %
110 V DC ... 250 V DC
Input voltage range 85 V AC ... 264 V AC
99 V DC ... 275 V DC
Dielectric strength maximum ≤ 300 V AC 15 s
AC frequency range 50 Hz ... 60 Hz
Discharge current to PE ≤ 3.5 mA
Current consumption 5.6 A (100 V AC)
2.4 A (240 V AC)
Inrush surge current ≤ 20 A (typical)
Power failure bypass > 10 ms (120 V AC)
> 15 ms (230 V AC)
Input fuse 10 A (internal (device protection))
Choice of suitable circuit breakers 10 A ... 16 A (Characteristics B, C, D, K)
Type of protection Transient surge protection
Protective circuit/component Varistor
Output data
Nominal output voltage 24 V DC ±1%
Setting range of the output voltage (U
Set
)
24 V DC ... 28 V DC (> 24 VDC, constant capacity restricted)
Nominal output current (I
N
)
20 A
Dynamic Boost (I
Dyn.Boost
)
30 A (5 s)
Derating > 60 °C ... 70 °C (2.5%/K)
Connection in parallel Yes, for redundancy and increased capacity
Connection in series Yes
Control deviation < 1 % (change in load, static 10 % ... 90 %)
< 3 % (Dynamic load change 10 % ... 90 %, 10 Hz)
< 0.1 % (change in input voltage ±10 %)
Residual ripple
≤ 30 mV
PP
Output power 480 W
Typical response time < 1 s
Maximum power dissipation in no-load condition < 5.7 W
https://www.phoenixcontact.com/us/products/2903151
09/06/2016Page3/7
Power supply unit-TRIO-PS-2G/1AC/24DC/20-2903151
Technical data
General
Net weight 1.5 kg
Efficiency > 93 % (for 230 V AC and nominal values)
Insulation voltage input/output 4 kV AC (type test)
1.5 kV AC (routine test)
Protection class I (in closed control cabinet)
MTBF (IEC 61709, SN 29500) > 1800000 h (25 °C)
> 1000000 h (40°C)
> 480000 h (60°C)
Mounting position horizontal DIN rail NS 35, EN 60715
Assembly instructions
Can be aligned: Horizontally 0 mm (≤ 40 °C) 10 mm (≤ 70 °C), vertically 50
mm
Connection data, input
Connection method Push-in connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 4 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 12
Stripping length 10 mm
Connection data, output
Connection method Push-in connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 10 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 6 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 8
Stripping length 10 mm
Connection data for signaling
Connection method Push-in connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 1.5 mm²
Conductor cross section AWG min. 24
